Nestled back in the upper potions of the Pacific Northwest, lies one of the more recognizable tactical and EDC belt makers on the market. Chris Calvert from Snake Eater Tactical (SET) has been producing some of the finest mission-driven belts for years. His recently upgraded SET War Belt offers one of the most secure, stable, and comfortable weapons/accessory platform available.
The SET War Belt is a custom-cut belt that comprises a three-part system; it includes an inner belt, mid-belt, and outer belt.
- 1st Belt (Inner Belt) – This belt is cut from a single layer of 16oz. Hypalon, then stitched with 1.5” wide (female) hook-and-loop strip along the entire outer-facing side. This inner belt is intended to be worn through the beltloops, and has a thumb loop on one end to help tighten it while you use the hook-and-loop (male) belt-keeper on the other to hold the overall belt in place. The Hypalon material facing the body offers a tremendous grip against fabric.
- 2nd Belt (Mid-Belt) – The second belt is the larger, padded portion to the SET War Belt and consists of ¼” closed-foam, cell padding with a heavy-duty mesh covering for ventilation, buoyancy, and drying. The pad has one full length of 1.5” (male) hook-and-loop on one side, and 1.5” (female) hook-and-loop on the other. Reinforced stitching is added in a diamondback pattern along the length of the pad. The premise being that the two-mating hook-and-loop panels on the 1st and 2nd belt join to form the base of the system and offer a large area of padding.
- 3rd Belt (Outer Belt) – The outer belt is where all the work gets done. It consists of an AustriAlpin D-Ring Cobra Buckle and a 2” channel for connecting carabiners, with the belt itself made from two layers of 1.75” Type 13 parachute webbing (with a tensile strength of 7,000 pounds). On the back is 1” (male) hook-and-loop material, stitched in 2.5” increments, resulting in a MOLLE-compatible pattern that allows the user to mount gear without interfering with the hook-and-loop integration.
Also provided for review were two Burro magazine pouches (two for pistol, and one for rifle). Each Burro is flared at the opening, made of an elastic material on the exterior, and has Hypalon lining on the inside and back of the exterior to give it positive retention. The Burro can expand to accommodate any single/double stacked magazine, or .223 rifle magazine (.308 Burro’s coming soon). Inside each Burro is a curved piece of kydex that aids in indexing the magazines.
Lastly, a nylon dump pouch was provided that uses the same mesh material as the mid-belt. It provides maximum drainage and drawstrings for carrying capacity that can be used to hold any number of range items (up to five AR magazines, brass, papers, pasters, flowers, etc.). The dump pouch features a strip of Type 13 material down the middle that gives the pouch an easy-access structure from the top.
The SET War Belt and Burro pouches come in six different colors; Ranger Green (featured), two variants of A-TACS, Black, Coyote Brown, and Multicam. Sizing instructions for the custom belt cut are provided on the website.
Product Evaluation Scores:
- Cost – Good (4/5): At $183.00 for the SET War Belt, $25-$28 per Burro, and $45 for the dump pouch, the cost of the system reflects the high-quality craftsmanship and materials used. Between the nylon, Hypalon, and Cobra buckle there are a lot of unique and quality materials at play that are seldom offered elsewhere. In comparison to the market, the cost of the belt and pouches are equally comparable to other American custom manufacturers who emphasize direct, hands-on manufacturing over industrial or overseas mass-production means.
- Comfort – Excellent (5/5): The flexibility of the overall belt, combined with the width of the mid-belt padding makes for an extremely comfortable system. The draw from the Burro is smooth, and the kydex makes for positive retention regardless of magazine type. Re-inserting magazines is easy and smooth thanks to the oversized flare at each opening.
- Durability – Excellent (5/5): It’s difficult to judge the long-term durability of the belt and components. With reinforced stitching, X-patterns, and bartack—the Type 13 belt and Cobra buckle are most likely to outlast all other the accessories, and will handle most heavy usage you throw at it. In Google searches some folks have tested the system on the range or in general use for over a year with no stated adverse effects. Snake Eater does offer separate purchase of the inner Hypalon or padded belt should those wear out.
- Functionality – Good (4/5): The functionality of the SET War Belt is without question as the MOLLE-compatible slots on the inside of the belt allow for full customization of any holster or accessory. You can even add a Burro on top of the dump pouch to save space on the belt, or for an additional magazine. The oversized mid-belt pad helps ensure that the body is not pinched against the belt when bending, or by other equipment. The three-layered system also is extremely rock solid and does not afford any movement in the belt or pouches itself. If you want to reconfigure the belt or add accessories, you do need to break the belt down. In truth, the only negative is more aesthetic as the sleeve-like Burros have a somewhat lackluster appearance, but this did not play a factor into evaluating them for function.
- Weight – Good (4/5): At 1.7 pounds overall, the three-part SET War Belt is very lightweight thanks in part to the overall materials, and this comes in under the weight of other notable quality belt manufacturers. Burros weigh 1-2 ounces each (depending on pistol or rifle) and the dump pouch weighs 4 ounces. Taken into context of ounces equal pounds, pounds equal pain and the SET War Belt is at less weight than most complete systems on the market so long-term wear of the system will not be as painful as others.
Overall Rating – Very Good (22/25)
Product Link: https://www.snakeeatertactical.com/product/set-war-belt-3-part-system-copy/
I am reviewing this product as a courtesy to the manufacturer and via STL Shooting Enthusiasts, so that I can evaluate it and provide my honest feedback. I am not bound by any written, verbal, or implied contract to give positive reviews. All views are my own, and based off my personal experience with the product.
The views and opinions expressed on this website are solely those of the author. The views and opinions do not necessarily represent those of the administrative staff, and/or any/all contributors to this site.
Categories: